• Search

Air-Blade, Air Knife, Air Knives, Stainless Steel Air Blade, Aluminum Air Knives, Air Knife Systems, Air Knives Systems

Model 10018 Standard Air-Blade™ Air Knife is used to blow scrap pieces and dirt from celluar phone parts after manufacturing.
(Fig. Air-Blade)

Air-Blade, Air Knife, Air Knives, Stainless Steel Air Blade, Aluminum Air Knives, Air Knife Systems, Air Knives Systems

(Fig. Stainless Steel Air Knife - Air-Blade™)

Why Choose US over Others?

  • Our aluminum air knives are anodized for longer life and superior quality over most competitors – two aluminum versions available gold color anodized for most applications and hard anodized for abrasive environments or where material may come in contact with the air knife.
  • Stainless steel shims are a standard when many competitors use plastic which can wear out quickly
  • Mounting holes for easy mounting without the need to dismantle the air knife
  • except for the smallest sizes, air inlet ports at the ends or the back allow for flexible air inlet choice, air use and high flow to higher force jets
Air-Blade™ Air Knife, Air-Blade™ Air Knives, Stainless Steel Air-Blade™ Air Knife, Aluminum Air-Blade™ Air Knives, Air-Blade™ Air Knife Systems, Air Knives, Air Knife Mounting System, Air Knife Mounting System Installation, Air Knife Accessories, Remove Oil Particular From a Compressed Air System, Calculating Compressed Air Consumption, Calculate Air Savings, Remove Water / Dirt / Rust From A Compressed Air System, Pressure Regulator

 

Standard Air-Blade™ Air Knife

Air-Blade™ Air Knife - Compressed Air Consumption Chart:

Inlet Pressure
Air Consumption SCFM per in.
(SLPM per 25 mm)
with std. .002" (.05 mm) gap
Air Consumption SCFM per in.
(SLPM per 25 mm)
with .004" (.10 mm) gap (shim added)
20 PSIG
1.4 BAR
1.3 SCFM/inch
36.8
2.5 SCFM/inch
70.8
40 PSIG
2.8 BAR
2.0 SCFM/inch
56.6
4.0 SCFM/inch
113.3
60 PSIG
4.1 BAR
2.7 SCFM/inch
75.8
5.5 SCFM/inch
155.7
80 PSIG
5.5 BAR
3.4 SCFM/inch
96.3
6.7 SCFM/inch
189.7
100 PSIG
6.9 BAR
4.1 SCFM/inch
116.3
8.1 SCFM/inch
229.4
120 PSIG
8.4 BAR
4.8 SCFM/inch
135.9
9.5 SCFM/inch
269.0

Based on an Amplification Ratio of 30:1 the air flow out would be 30 times the above.
Compressed Air Flow Through A Hole In Standard Cubic Feet Per Minute
(14.7 Psia/70ºF/0% Relative Humidity)

Inlet Pressure (PSIG)
Diameter Of Hole In Inches
 
1/64
1/32
1/16
1/8
1/4
3/8
1/2
5/8
3/4
20
.123
.491
1.96
7.86
31.4
70.7
126
196
28.3
40
.194
.774
3.1
12.4
49.6
112
198
310
446
60
.264
1.06
4.23
16.9
67.6
152
271
423
609
80
.335
1.34
5.36
21.4
85.7
193
343
536
771
100
.406
1.62
6.49
26
104
234
415
649
934
120
.476
1.91
7.62
30.5
122
274
488
762
1097

Nex Flow™ Air Products Corp | Williamsville, New York | Richmond Hill, Ontario Nex Flow Air